Heliotec

TRUDARKNESS by HELIOTEC

Trade Only

Now introducing to North America

A HELIOTEC TRADE PROGRAM

100% BLACKZERO LIGHT LEAKAGE

As presented by TruDarkness at Sun Shading Expo North America.

The complete room darkening system from The Smart Blinds Co, Australia. Now being introduced to fabricators and workrooms across North America.

Not just a blind. A complete room darkening system.

TruDarkness room darkening system installed in a window

Don't lose sleep with ordinary black out blinds.

Get a better night sleep with TruDarkness.

Sealed Side Channels

Light Block Strips seal the sides, top, and bottom bar, so the room goes dark at the edges, not just in the middle.

Slimline and Adjustable

A fully enclosed slimline pelmet, cast aluminium end caps, and adjustment for out of square frames.

Fabricator Friendly

Systems and components as raw materials. Fabricators fit their own fabrics and their own motors. Fit for Somfy, Rollease, AOK, Alpha, and Ronco, as discussed at the Expo.

How It Works

Most blackout shades stop light at the fabric. TruDarkness stops it at the frame, with sealed channels on both sides, so nothing gets around the edge.

The complete system, front view
  1. Aluminium Frame
    Step 1

    Aluminium Frame

    Scratch and mark resistant aluminium. The frame joins together and closes the gaps standard shades leave.

  2. Side Channels
    Step 2

    Side Channels

    The fabric runs inside a channel on both sides. A snap clip system means no visible fixings on the front of the track.

  3. Snap Lock Cassette
    Step 3

    Snap Lock Cassette

    Snap Lock Technology in the cassette holds the roller secure, with an integrated idle pin receiver.

  4. Cast Aluminium End Caps
    Step 4

    Cast Aluminium End Caps

    Precision end caps in cast aluminium, not plastic.

  5. Channel and Pelmet Connector
    Step 5

    Channel and Pelmet Connector

    A dedicated connector joins each side channel to the pelmet, with brush and fin seals inside the channel.

  6. Heavy Gauge Bottom Bar
    Step 6

    Heavy Gauge Bottom Bar

    A heavy gauge aluminium bottom bar that needs no separate weight insert, with a USB-C charging port in the lower frame by the motor end.

  7. Motorized, Cordless
    Step 7

    Motorized, Cordless

    Motorized as standard, integrated and cordless. Fabricators can also fit their own motors: Somfy, Rollease, AOK, Alpha, and Ronco fit, as discussed at the Expo.

The System, Blown Apart

  1. 1. Frame separates

  2. 2. Side channels open

  3. 3. Cassette lifts away

  4. 4. Roller and fabric drop in

  5. 5. Bottom bar seals the base

Every part of the system, shown the way a fabricator sees it on the bench. Photography from the TruDarkness animation is swapped into these panels in the production build.

Built Like a System, Not a Shade

  • Sealed on all four sides

  • Slim profile frame

  • Concealed seals inside the channel

  • Quiet motorized travel

  • Face fit or recess fit

  • Works with the motors fabricators already use

Wake up to the difference that perfect light blockout makes.

Technical Pack

Light Block Strips
Built into the side channels, the reveal, and the bottom bar, sealing the full perimeter.
Fully Adjustable
Adjustability in every dimension compensates for out of square window frames.
Precision End Caps
Cast aluminium, where others use plastic.
Motorized as Standard
Quiet, integrated, and cordless, with a compact remote. Multi station remotes available.
Battery
Lithium ion. Around six months of typical use per charge, a full recharge in about six hours, and the blind works the moment it is plugged in, even on a flat battery.
Charging
A low profile USB-C port in the lower frame. No climbing to the pelmet to charge.
USB-C charging port in the lower frame
Size Range
Custom made to each opening. Published range from 540mm wide up to 3000mm by 2700mm.
Motor Fit
Fabricators can fit their own motors: Somfy, Rollease, AOK, Alpha, and Ronco.

Standard Frame Colors

Black
White

Two standard frame colors, White and Black. Custom powder coat colors available on request.

Fabric Is the Fabricator's Choice

This program supplies the system and components only. Fabricators run their own true blackout fabric, any stock that accepts a zip, from their own shelves. No fabric is supplied with the system, and that is deliberate: your fabric, your margins, your choice.

For Fabricators: Your Own TruDarkness Website, Ready to Go

When a fabricator joins the TruDarkness program, Heliotec Ignition can turn on a complete TruDarkness website for them, under their own brand, from day one. No web project. No waiting. It can run as a full branded website, or as a module added to the site they already have.

Your Fabricator Name

Not just a blind. A complete room darkening system.

  • Branded pages

    The system story, told properly, wearing the fabricator brand.

  • Their leads

    The inquiry form routes straight to the fabricator.

  • Installation instructions

    Fitting guidance ready for their team and their customers.

  • FAQs

    The common questions, answered in plain words.

  • Warranty and returns

    The confirmed program terms, in place from the start.

  • Always current

    Updates handled centrally by Heliotec Ignition, so every fabricator site stays current at once.

Joining the program should make a fabricator stronger on day one. This is how.

How lead capture works

  1. Step 1

    Request the pack.

    A fabricator fills in the short form below.

  2. Step 2

    Instant delivery.

    The trade pack sends at once, and the lead is tagged by type, region, and motor lines in the CRM.

  3. Step 3

    Follow up starts.

    A welcome sequence and a short education series keep the conversation warm until they are ready.

Request the TruDarkness Trade Pack